FSQ500L

3 Terminations5V~10V 4 Pin FSQ500 AC to DC power converterFPS? Series 1 Outputs130kHz

Manufacturer: ON Semiconductor
Nocochips NO: 598-FSQ500L
Package: TO-261-4, TO-261AA
Datasheet: PDF
Stock: 838
Description: 3 Terminations5V~10V 4 Pin FSQ500 AC to DC power converterFPS? Series 1 Outputs130kHz (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-261-4, TO-261AA
Number of Pins	4
Weight	188mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	1997
Series	FPS™
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	3
ECCN Code	EAR99
Resistance	29Ohm
Terminal Finish	Tin (Sn)
Power (Watts)	3W
Subcategory	Switching Regulator or Controllers
Power Rating	2.5W
Max Power Dissipation	780mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Terminal Pitch	2.3mm
Current Rating	500μA
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	FSQ500
JESD-30 Code	R-PDSO-G3
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	700V
Input Voltage-Nom	6.5V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	760μA
Power Dissipation	780mW
Output Current	245mA
Voltage - Supply (Vcc/Vdd)	5V~10V
Max Supply Current	880μA
Control Features	Soft Start
Topology	Flyback
Min Input Voltage	85V
Clamping Voltage	2.7V
Control Mode	CURRENT-MODE
Frequency - Switching	130kHz
Max Input Voltage	10V
Control Technique	PULSE WIDTH MODULATION
Nominal Input Voltage	10V
Switcher Configuration	SINGLE
Max Output Power	2.5W
Internal Switch(s)	Yes
Fault Protection	Current Limiting, Over Load, Over Temperature
Max Duty Cycle	66 %
Duty Cycle	60%
Output Isolation	Isolated
Voltage - Start Up	6V
Min Input Voltage (AC)	85V
Max Input Voltage (AC)	265V
Min Breakdown Voltage	700V
Height	1.6mm
Length	6.5mm
Width	3.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

FSQ500L Overview

There is a ac to dc converter embedded in package TO-261-4, TO-261AA .The AC/DC power converter Tape & Reel (TR) is available for this product.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.130kHz is the switching frequency.The AC/DC converter is capable of being used when the supply voltage is 5V~10V (Vcc/Vdd).In total, it has 3 terminations.There are 4 pins on the ac/dc converter.It are possible to mount thare ac dc converters by Surface Mount .The product is acdc converter of the FPS? manufacturer family.The FSQ500 family can be used to search for similar acdc converters.A total of 1 outputs are available for processing.Switching Regulator or Controllers contains the ac to dc conversions.Currently, the output current is set to 245mA .As a result, its output voltage is 700V .Here is the standard for REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 10V .The AC to DC inverter may be operated with an input voltage less than 85V volts.The maximum supply current is 880μA .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.As a result, this power AC DC's resistance is 29Ohm .AC to DC power converters with a max output power of 2.5W may be used.