banner_page

FSQ510H

6.7V~20V 8 Pin FSQ510 AC to DC power converterFPS? Series 1 Outputs94.3kHz~132kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSQ510H
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 458
  • Description: 6.7V~20V 8 Pin FSQ510 AC to DC power converterFPS? Series 1 Outputs94.3kHz~132kHz (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 851mg
Operating Temperature -40°C~140°C TJ
Packaging Tube
Series FPS™
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 28Ohm
Max Power Dissipation 9W
Base Part Number FSQ510
Number of Outputs 1
Nominal Supply Current 800μA
Power Dissipation 1.47W
Output Current 280mA
Voltage - Supply (Vcc/Vdd) 6.7V~20V
Max Supply Current 1mA
Control Features Sync
Topology Flyback
Frequency - Switching 94.3kHz~132kHz
Max Output Power 6W
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature
Max Duty Cycle 66 %
Duty Cycle 60%
Output Isolation Isolated
Voltage - Start Up 8.7V
Min Breakdown Voltage 700V
RoHS Status RoHS Compliant

FSQ510H Overview


This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .Tube case is available for the ac dc converter.It is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~140°C TJ °C.There is 94.3kHz~132kHz switching frequency.This AC/DC converter is suitable for operation in the range of 6.7V~20V supply voltage (Vcc/Vdd).Approximately 8 pins are present on the ac/dc converter.Through Hole are the recommended mounting method for the ac dc converters.It belongs to the family of FPS? manufacturers.The FSQ510 family can be used to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.Currently, the output current is set to 280mA .Supply currents up to 1mA can be handled by this power AC DC.The resistance of this power AC DC can be determined to be 28Ohm .AC to DC power converters with a maximum output power of 6W can be used.

FSQ510H Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 94.3kHz~132kHz
With 8 pins
Output Current at 280mA
Resistance : 28Ohm

FSQ510H Applications


There are a lot of ON Semiconductor FSQ510H AC DC Converters applications.

  • Set -Top Box (STB) Power Supply
  • Linear Adapter Replacements
  • Wall switches
  • Cleaners
  • Consumer electronics
  • Adapters
  • Air conditioners
  • Home appliances
  • Humidifier
  • Standby Power Supply

Write a review

Note: HTML is not translated!
    Bad           Good