FST16211MTD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 11Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 16211 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 7 ns |
| Output Polarity | TRUE |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FST16211MTD Overview
It is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save board space.Tube is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sAmong its basic configurations are 56 terminations.The base part number is 16211, which is also useful when looking up signal switch's related components.For multiplexer's system, 4.5V voltage is supplied.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 56 pins.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.There are 24 bits in signal multiplexer.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.It is provided that 5V has a power supply in order to function normally.This is a signal switch that is categorized as Bus Driver/Transceivers.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.The system operates with a resistance of 11Ohm.The output current of 64mA is provided for higher switches' flexibility.
FST16211MTD Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FST16211MTD Applications
There are a lot of ON Semiconductor FST16211MTD Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Idle motor
- Metal detectors
- HD surveillance system
- Analog to digital conversion
- Enabling block of memory depending on address in memory chips
- Code conversion
- Computer memory
- Analog, digital or video signal switching
- To select different devices in microprocessor output
