FST16211MTDX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 11Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 16211 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FST16211MTDX Overview
In order to conserve board space, digital switch is included in the 56-TFSOP (0.240, 6.10mm Width).Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.The basic configuration includes 56 terminations.The base part number is 16211, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 4.5V voltage.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply Single that is employed in this case.This multiplexer ic has 56 pins configured.It is mounted in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer consists of 24 bits.Vsup should be kept at 4V to prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.No external influence consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The resistance of the signal switching is 2.This signal switching operates at a resistance of 11Ohm.For higher switches' flexibility, the output current is set to 64mA.
FST16211MTDX Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FST16211MTDX Applications
There are a lot of ON Semiconductor FST16211MTDX Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Telephone network
- Audio transmission
- Computer memory
- Data transfer
- Implementing boolean functions with multiple variables
- Relay
- Speed synchronization of multiple motors in industries
- Transmission from the computer system of a satellite
- Signal router
