banner_page

FST16233MEA

56 Terminations4V~5.5V Signal switch1 Outputs2 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-FST16233MEA
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 688
  • Description: 56 Terminations4V~5.5V Signal switch1 Outputs2 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tube
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 56
Type Multiplexer/Demultiplexer
Additional Feature MUX/DMUX SWITCH
Technology CMOS
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 4.5V
Terminal Pitch 0.635mm
Pin Count 56
JESD-30 Code R-PDSO-G56
Number of Outputs 1
Qualification Status Not Qualified
Circuit 8 x 1:2
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4V
Family CBT/FST/QS/5C/B
Number of Inputs 1
Output Characteristics 3-STATE
Output Polarity TRUE
Propagation Delay (tpd) 6.8 ns
Voltage Supply Source Single Supply
Independent Circuits 2
Width 7.49mm
RoHS Status ROHS3 Compliant

FST16233MEA Overview


This is a relatively small item of digital switch that is included in the 56-BSSOP (0.295, 7.50mm Width) in order to save space on the board.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The basic configuration includes 56 terminations.The multiplexer's system is powered by 4.5V voltage.A component pin count of 56 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The logic switch is a member of the family of CBT/FST/QS/5C/B.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.This turn signal switch has 1 outputs designed for its operation.The multiplexer is equipped with 1 inputs.In addition, MUX/DMUX SWITCH provides improved characteristics.

FST16233MEA Features


Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
MUX/DMUX SWITCH

FST16233MEA Applications


There are a lot of Rochester Electronics, LLC FST16233MEA Signal Switches / Multiplexers / Decoders applications.

  • GLAN
  • Home automation system
  • Automation system
  • Signal router
  • Data transfer
  • Electronically controlled engine system
  • Logic gates for other digital devices
  • Analog, digital or video signal switching
  • Injectors
  • Used to connect a single source to multiple destinations

Write a review

Note: HTML is not translated!
    Bad           Good