FST16233MTDX
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MUX/DMUX SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 16233 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 16 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.8 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Multiplexer |
| Number of Inputs | 32 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Height | 900μm |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740mg |
FST16233MTDX Overview
Digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.As part of its basic configuration, 56 terminations are designed as a part of it.In addition, it also has a base part number of 16233, which can be used to find related parts.The multiplexer's system is powered by 4.5V voltage.It is the end of conductors that is represented by GULL WING.This supply type employs Single.The board has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.A power supply is provided for mux switch's normal operation of 5V.The turn signal switch contains 16 outputs designed to operate.This is a signal switch that is categorized as Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.This multiplexer provides 32 inputs.Transmission is carried out over 16 channels in the turn signal switch's circuit.Additionally, it improves the characteristics of MUX/DMUX SWITCH.
FST16233MTDX Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
MUX/DMUX SWITCH
FST16233MTDX Applications
There are a lot of ON Semiconductor FST16233MTDX Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Speed synchronization of multiple motors in industries
- RF-based home automation system
- Video transmission
- Night vision cameras
- Arithmetic Logic Units
- To select different devices in microprocessor output
- Home automation system
- Data bus control
- Electronically controlled engine system
