banner_page

FST3125MX

14 Terminations4V~5.5V 14 Pin 3125 Signal switch4 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FST3125MX
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 231
  • Description: 14 Terminations4V~5.5V 14 Pin 3125 Signal switch4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Weight 150mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2008
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Bus Switch
Resistance 11Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number 3125
Operating Supply Voltage 5V
Circuit 1 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Channels 4
Load Capacitance 50pF
Number of Ports 2
Output Current 128mA
Number of Bits 1
Throw Configuration SPST
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 5.6 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Address Bus Width 4b
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height 1.5mm
Length 8.75mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FST3125MX Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 14-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tape & Reel (TR).Mounting is performed using Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.Among its basic configurations are 14 terminations.There is a base part number 3125 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.The board has 14 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 1 bits.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.2 is the resistance at which it operates.With a resistance of 11Ohm, it operates.Transmission is carried out over 4 channels in the turn signal switch's circuit.128mA provides a high degree of switches' flexibility.

FST3125MX Features


Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

FST3125MX Applications


There are a lot of ON Semiconductor FST3125MX Signal Switches / Multiplexers / Decoders applications.

  • CNC machines
  • Electronic circuits
  • Telephone network
  • LVDS
  • War field flying robot with a night vision flying camera
  • Analog to digital conversion
  • Data distribution
  • Analog, digital or video signal switching
  • VGA
  • Night vision cameras

Write a review

Note: HTML is not translated!
    Bad           Good