FST3126MTCX
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 11Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 3126 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Address Bus Width | 4b |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FST3126MTCX Overview
For the purpose of saving board space, digital switch is included in the 14-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.The basic configuration of this system includes 14 terminations.The base part number is 3126, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 5V is supplied.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.With 14 pins, it is configured.Surface Mount is the way it is mounted.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 1 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.In order for 5V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.As far as the resistance is concerned, it operates with 2.A resistance of 11Ohm is used to operate it.The configuration of the mux switch contains 4 elements.
FST3126MTCX Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FST3126MTCX Applications
There are a lot of ON Semiconductor FST3126MTCX Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Analog, digital or video signal switching
- Data transfer
- Computer memory
- GLAN
- CPU memory location identification
- To select different task for memory in microprocessor memory systems
- HD surveillance system
- Seven segment displays
- Combinational circuit
