FST3126MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 150mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 11Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 3126 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 4 |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Address Bus Width | 4b |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 1.499mm |
| Length | 8.74mm |
| Width | 3.988mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FST3126MX Overview
It is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.Tape & Reel (TR) is the packaging method.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.There is a design for terminating 14 as part of its basic configuration.To find signal switch's related components, a base part number of 3126 may also be used.The multiplexer is supplied with 5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.The board has 14 pins configured.This unit is mounted in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 1 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This signal switching operates at a resistance of 2.The resistance of the signal switching is 11Ohm.The turn signal switch's circuit has 4 transmission channels.For greater switches' flexibility, 64mA provides the output current.
FST3126MX Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FST3126MX Applications
There are a lot of ON Semiconductor FST3126MX Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- To select different task for memory in microprocessor memory systems
- Data communication
- Steel plants
- Audio transmission
- Microprocessor memory systems
- Memory chips
- Injectors
- To select different devices in microprocessor output
- Medium scale TV wall
