FST3384MTCX
| Parameters | |
|---|---|
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 212mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 11Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 3384 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 128mA |
| Number of Bits | 10 |
FST3384MTCX Overview
For the purpose of saving board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 24 terminations.Its logic switch base part number is 3384 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 4.5V is supplied.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.A configuration of 24 pins is used.It is positioned in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 10 bits.Vsup should be kept at 4V to prevent some unnecessary failures.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 11Ohm.128mA provides a high degree of switches' flexibility.
FST3384MTCX Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FST3384MTCX Applications
There are a lot of ON Semiconductor FST3384MTCX Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Arithmetic Logic Units
- Encrypted communications system
- CPU memory location identification
- Control unit of Central Processing unit (CPU)
- High-performance memory systems
- Data distribution
- Enabling different rows of memory depending on address in memory chips
- CNC machines
- Make half adder
