banner_page

FST34170MTD

4V~5.5V 56 Pin FST34170 Signal switch


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FST34170MTD
  • Package: 56-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 440
  • Description: 4V~5.5V 56 Pin FST34170 Signal switch(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-TFSOP (0.240, 6.10mm Width)
Number of Pins 56
Operating Temperature -40°C~85°C
Packaging Tube
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Multiplexer/Demultiplexer
Resistance 14Ohm
Voltage - Supply 4V~5.5V
Base Part Number FST34170
Circuit 16 x 1:2
Operating Supply Current 3μA
Number of Bits 34
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 35 ns
Logic Function Demultiplexer, Multiplexer
Supply Type Single
Turn-Off Delay Time 7.7 ns
High Level Output Current -128mA
Low Level Output Current 128mA
Number of Input Lines 2
Voltage Supply Source Single Supply
Independent Circuits 1
RoHS Status RoHS Compliant
Lead Free Lead Free

FST34170MTD Overview


Due to the lack of space on the board, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).Tube represents its packaging.digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The base part number is FST34170, so you can find its logic switch related parts using that number.There is a type of supply of Single.Currently, it is configured with 56 pins.Surface Mount is the way it is mounted.As a result, signal multiplexer provides 34 bits.It consumes 3μA current of multiplexer ic since it is not affected by external factors.14Ohm is the resistance at which it operates.To accept voltage levels, the multiplexers have2 input lines.Load stability of the multiplexers can be maintained by delivering 3μA supply voltage.

FST34170MTD Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
2 input lines
Operating with the supply current of 3μA

FST34170MTD Applications


There are a lot of ON Semiconductor FST34170MTD Signal Switches / Multiplexers / Decoders applications.

  • D/A converters
  • Steel plants
  • Seven segment displays
  • Code conversion
  • Data bus control
  • Make full adder
  • Enabling block of memory depending on address in memory chips
  • Computer memory
  • Microprocessor instruction decoding
  • Electronics industry

Write a review

Note: HTML is not translated!
    Bad           Good