Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
740mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
35Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
16211 |
Number of Outputs |
4 |
Operating Supply Voltage |
5V |
Circuit |
12 x 1:1 |
Power Supplies |
5V |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
6.5 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Width |
6.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FSTD16211MTDX Overview
Digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.The basic configuration includes 56 terminations.To find signal switch's related components, a base part number of 16211 may also be used.The turn signal switch is supplied with a voltage of 5V volts.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.This multiplexer ic has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 24 bits.In order for 5V to operate normally, a power supply is provided.As part of the operation of this turn signal switch, there are 4 outputs.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The signal switching operates with a resistance of 2.The resistance of the signal switching is 35Ohm.For higher switches' flexibility, the output current is set to 64mA.
FSTD16211MTDX Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FSTD16211MTDX Applications
There are a lot of ON Semiconductor FSTD16211MTDX Signal Switches / Multiplexers / Decoders applications.
- CPU memory location identification
- Enabling different functions units in microprocessor instruction decoding
- Video transmission
- Decimal decoder
- Computer memory
- CNC machines
- Solenoid cooling fan
- Automation system
- RF-based home automation system
- Analog to digital conversion