banner_page

FSTD3306MTCX

8 Terminations4.5V~5.5V 8 Pin 3306 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSTD3306MTCX
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 102
  • Description: 8 Terminations4.5V~5.5V 8 Pin 3306 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Weight 158mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 50Ohm
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 3306
Number of Elements 2
Circuit 1 x 1:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports 2
Number of Bits 1
Throw Configuration SPST
Propagation Delay 250 ps
Quiescent Current 1.5mA
Turn On Delay Time 5.8 ns
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Length 4.4mm
Width 3mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount

FSTD3306MTCX Overview


This is a relatively small item of digital switch that is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As parts of its basic configuration, 8 terminations are desgined.To find signal switch's related components, a base part number of 3306 may also be used.The turn signal switch is supplied with a voltage of 5V volts.As a result, conductors end at GULL WING.There is a type of supply of Single.This multiplexer ic has 8 pins configured.This unit is mounted in the way of Surface Mount.Signal multiplexer provides 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.It consumes 1.5mA current of multiplexer ic since it is not affected by external factors.A resistance of 2 governs its operation.A resistance of 50Ohm is used to operate the signal switching.The mux switch configuration contains 2 elements.

FSTD3306MTCX Features


Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

FSTD3306MTCX Applications


There are a lot of ON Semiconductor FSTD3306MTCX Signal Switches / Multiplexers / Decoders applications.

  • Make half adder
  • Data communication
  • Telephone network
  • Speed control of medern motors
  • War field flying robot with a night vision flying camera
  • Enabling different functions units in microprocessor instruction decoding
  • Seven segment displays
  • Small scale TV wall
  • Memory chips
  • Signal router

Write a review

Note: HTML is not translated!
    Bad           Good