FSTU32160MTDX
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 16 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSTU32160 |
| Operating Supply Voltage | 5V |
| Circuit | 16 x 1:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Bits | 32 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 35 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 16 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSTU32160MTDX Overview
As a means of saving space, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The basic configuration of this system includes 56 terminations.The base part number is FSTU32160, which can also be used to find its logic switch related parts.The multiplexer is supplied with 4.5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.The board has 56 pins configured.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 32 bits in signal multiplexer.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.During mux switch's normal operation, 5V is provided with a power supply.This is a signal switch that is categorized as Other Logic ICs.It consumes 3μA current of multiplexer ic without external influences.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.With a resistance of 14Ohm, it operates.Signal source consists of 16 output lines.
FSTU32160MTDX Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
16 output lines
FSTU32160MTDX Applications
There are a lot of ON Semiconductor FSTU32160MTDX Signal Switches / Multiplexers / Decoders applications.
- Communication system
- War field flying robot with a night vision flying camera
- Medical industry
- Relay
- Enabling different rows of memory depending on address in memory chips
- Memory chips
- CPU memory location identification
- Idle motor
- Combinational circuit
- Analog to digital conversion
