FT232HQ-TRAY

1.62V~1.98V 2.97V~3.63V CMOS USB 2.0 UART, FIFO Controllers Interface ICs QUAD 48 Pins Bridge, USB to UART,FIFO 0.5mm 48-VFQFN Exposed Pad

Manufacturer: FTDI, Future Technology Devices International Ltd
Nocochips NO: 350-FT232HQ-TRAY
Package: 48-VFQFN Exposed Pad
Datasheet: PDF
Stock: 811
Description: 1.62V~1.98V 2.97V~3.63V CMOS USB 2.0 UART, FIFO Controllers Interface ICs QUAD 48 Pins Bridge, USB to UART,FIFO 0.5mm 48-VFQFN Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Package / Case	48-VFQFN Exposed Pad
Number of Pins	48
Operating Temperature	-40°C~85°C
Packaging	Tray
Published	2006
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	48
Subcategory	Other uPs/uCs/Peripheral ICs
Technology	CMOS
Voltage - Supply	1.62V~1.98V 2.97V~3.63V
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Function	Bridge, USB to UART,FIFO
Operating Supply Voltage	3.3V
Number of Channels	1
Interface	UART, FIFO
Operating Supply Current	24mA
Nominal Supply Current	60mA
uPs/uCs/Peripheral ICs Type	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Data Rate	30 Mbps
Protocol	USB
Dual Supply Voltage	3.3V
Number of Transceivers	2
ESD Protection	Yes
Standards	USB 2.0
Bus Compatibility	I2C
Data Transfer Rate-Max	40 MBps
Height	900μm
Length	8mm
Width	8mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

FT232HQ-TRAY Overview

The 48-VFQFN Exposed Pad package contains it. Easily transportable packaging in Tray-shape. Keeping the temperature at -40°C~85°C will ensure reliable operation. You should be able to use it as long as you use 1.62V~1.98V 2.97V~3.63VV power. In it, there are 48 terminations. When 1.8V is used as the supply voltage, high efficiency can be achieved. 48 pins are needed for operation. BUS CONTROLLER, UNIVERSAL SERIAL BUS uPs, uCs, and peripheral ICs are present in this gadget. It is set to 24mA to supply the gadget with a constant current. A 3.3V-volt supply voltage is recommended for maximum efficiency. This device can be used alone in Other uPs/uCs/Peripheral ICs. In this case, 2 transceivers are involved. There are currently 1 channels available.