GAL16V8D-10LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®16V8 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | PROGRAMMABLE OUTPUT POLARITY |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 115mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-10LJ Overview
8 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 20-LCC (J-Lead) package.In this case, there are 8 I/Os programmed.There are 20 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 5V volts.There is a part in the family [0].As a result, it is packaged as Bulk.It operates with the operating temperature of 0°C~75°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.The GAL?16V8series FPGA is one of these types.With 20pins programmed, the chip is ready to use.It is also possible to find PROGRAMMABLE OUTPUT POLARITYwhen using this device.The GAL16V8indicates that its related parts can be found.The supply voltage should be maintained at 5V for high efficiency.The electronic part is mounted by Surface Mount.The pins are [0].There is a maximum supply voltage of 5.25Vwhen the device is operating.The minimal supply voltage is 4.75V.A total of 5V power supplies are needed to run it.In this case, 83.3MHzis the frequency that can be achieved.There are 8 dedicated inputs used to detect the status of input signals.A 8output is configured for this device.It is associated with 64product terms.
GAL16V8D-10LJ Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-10LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-10LJ CPLDs applications.
- Software-driven hardware configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- LED Lighting systems
- STANDARD SERIAL INTERFACE UART
- Custom shift registers
- DMA control
- Field programmable gate
- Auxiliary Power Supply Isolated and Non-isolated
- Power up sequencing
- State machine design
