GAL16V8D-10LJN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®16V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 115mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-10LJN Overview
In the mobile phone network, there are 8macro cells, which are cells with high-power antennas and towers.In the 20-LCC (J-Lead)package, you will find it.The device has 8inputs and outputs.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.There is 5V voltage supply for this device.There is a part in the family [0].Bulkis the packaging method.The device operates at a temperature of 0°C~75°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the GAL?16V8 series.There are 20pins on the chip.The GAL16V8indicates that related parts can be found.The supply voltage should be maintained at 5V for high efficiency.Surface Mountis used to mount this electronic component.A total of 20pins are provided on this board.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.A minimum supply voltage of 4.75V is required for it to operate.In order for the device to operate, it requires 5V power supplies.A frequency of 83.3MHzcan be achieved.Input signals are detected using 8dedicated inputs.It is configured to produce 8outputs.In addition, it contains 64 product terms.
GAL16V8D-10LJN Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-10LJN Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-10LJN CPLDs applications.
- TIMERS/COUNTERS
- Custom shift registers
- PLC analog input modules
- Discrete logic functions
- Software Configuration of Add-In Boards
- Configurable Addressing of I/O Boards
- Voltage level translation
- Page register
- Cross-Matrix Switch
- Reset swapping
