GAL16V8D-10QJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®16V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-10QJN Overview
In the mobile phone network, there are 8macro cells, which are cells with high-power antennas and towers.The item is packaged with 20-LCC (J-Lead).There are 8 I/Os on the board.Devices are programmed with terminations of [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5V is used as the power supply for this device.It is a part of the family [0].Ideally, the chip should be packaged by Bulk.It operates with the operating temperature of 0°C~75°C TA to ensure its reliability.There should be a Surface Mounton the chip.The FPGA belongs to the GAL?16V8 series.The chip is programmed with 20 pins.The GAL16V8indicates that its related parts can be found.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.This device is mounted by Surface Mount.There are 20 pins on the device.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.The minimal supply voltage is 4.75V.A total of 5V power supplies are needed to run it.You can achieve 83.3MHzfrequencies.The status of input signals is detected by 8dedicated inputs.There is an output of 8configured on the device.It is equipped with 64 product terms.
GAL16V8D-10QJN Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-10QJN Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-10QJN CPLDs applications.
- Power automation
- Synchronous or asynchronous mode
- Custom shift registers
- Software-Driven Hardware Configuration
- LED Lighting systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Interface bridging
- Configurable Addressing of I/O Boards
- Address decoders
- Preset swapping
