GAL16V8D-15LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®16V8 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-15LJI Overview
There are 8 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 20-LCC (J-Lead)package, you will find it.The device has 8inputs and outputs.There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.The power source is powered by 5Vvolts.This part is part of the family [0].It is packaged in the way of Bulk.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.The GAL?16V8series comprises this type of FPGA.A chip with 20pins is programmed.Its related parts can be found in the [0].The supply voltage should be maintained at 5V for high efficiency.In this case, it is mounted by Surface Mount.A total of 20pins are provided on this board.A maximum supply voltage of 5.5Vis used in its operation.The minimal supply voltage is 4.5V.This device runs on 5Vvolts of electricity.There can be 62.5MHz frequency achieved.To detect the status of input signals, there are 8dedicated inputs.The device is configured with an output of [0].It has been associated with 64product terms.
GAL16V8D-15LJI Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-15LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-15LJI CPLDs applications.
- ROM patching
- DMA control
- I/O PORTS (MCU MODULE)
- Protection relays
- Dedicated input registers
- Synchronous or asynchronous mode
- State machine design
- USB Bus
- Storage Cards and Storage Racks
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
