GAL16V8D-15QJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®16V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Voltage | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-15QJN Overview
There are 8 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a 20-LCC (J-Lead) package.The device is programmed with 8 I/Os.There are 20 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 5V volts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.As part of the GAL?16V8series, it is a type of FPGA.20pins are programmed on the chip.The GAL16V8can be used to identify its related parts.The supply voltage should be maintained at 5V for high efficiency.Surface Mountis used to mount this electronic component.The 20pins are designed into the board.It operates at a maximum supply voltage of 5.25V volts.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A power supply of 5Vvolts is required to operate this device.You can achieve 62.5MHzfrequencies.A total of 8dedicated inputs are available for detecting the status of input signals.It is configured to produce 8outputs.The product is equipped with 64 product terms.This device uses 16 inputs.The maximum current available for its operation is 55mA.
GAL16V8D-15QJN Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-15QJN Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-15QJN CPLDs applications.
- Power Meter SMPS
- Handheld digital devices
- Interface bridging
- ON-CHIP OSCILLATOR CIRCUIT
- Cross-Matrix Switch
- Multiple DIP Switch Replacement
- USB Bus
- Complex programmable logic devices
- Custom state machines
- Bootloaders for FPGAs
