GAL16V8D-25LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®16V8 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 41.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-25LJI Overview
In the mobile phone network, there are 8macro cells, which are cells with high-power antennas and towers.The item is packaged with 20-LCC (J-Lead).The device is programmed with 8 I/O ports.Terminations of devices are set to [0].Its terminal position is QUAD.A voltage of 5Vprovides power to the device.This part is part of the family [0].Bulkshould be used to package the chip.To ensure reliability, the device operates at a temperature of [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of GAL?16V8series FPGA.The chip is programmed with 20 pins.The GAL16V8indicates that its related parts can be found.The supply voltage should be maintained at 5V for high efficiency.Surface Mountis the mounting point of this electronic part.The 20pins are designed into the board.There is a maximum supply voltage of 5.5Vwhen the device is operating.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.There is 5V power supply available for it.You can achieve 41.6MHzfrequencies.Input signals are detected using 8dedicated inputs.There is an output of 8configured on the device.The product is equipped with 64 product terms.
GAL16V8D-25LJI Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-25LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-25LJI CPLDs applications.
- Parity generators
- Wide Vin Industrial low power SMPS
- Code converters
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Complex programmable logic devices
- Software-Driven Hardware Configuration
- DDC INTERFACE
- Custom state machines
- Power Meter SMPS
- Configurable Addressing of I/O Boards
