GAL16V8D-25LP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®16V8 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 41.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 90mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Speed Grade | 25 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height | 3.3mm |
| Length | 26.16mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-25LP Overview
8 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.A 20-DIP (0.300, 7.62mm) package contains the item.This device has 8 I/O ports programmed into it.The device is programmed with 20 terminations.The terminal position of this electrical part is DUAL, which serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.It is a part of family [0].It is recommended to package the chip by Bulk.The device operates at a temperature of 0°C~75°C TAin order to ensure its reliability.It is mounted in the way of Through Hole.As part of the GAL?16V8series, it is a type of FPGA.There are 20 pins on the chip.There are related parts in [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].Through Holeis used to mount this electronic component.A total of 20pins are provided on this board.A voltage of 5.25V is the maximum supply voltage for this device.In order for it to operate, a supply voltage of 4.75Vis required.Currently, it is powered by 5Vsources.There can be 41.6MHz frequency achieved.The status of input signals is determined by 8dedicated inputs.This device has 8outputs configured.There are 64 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL16V8D-25LP Features
20-DIP (0.300, 7.62mm) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-25LP Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-25LP CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Timing control
- Synchronous or asynchronous mode
- Discrete logic functions
- Cross-Matrix Switch
- ToR/Aggregation/Core Switch and Router
- Custom state machines
- DDC INTERFACE
- ROM patching
- I/O PORTS (MCU MODULE)
