GAL16V8D-25QJN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®16V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 41.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-25QJN Overview
A mobile phone network consists of 8macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 20-LCC (J-Lead) package.The device has 8inputs and outputs.It is programmed that device terminations will be 20 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.This part is part of the family [0].It is recommended that the chip be packaged by Bulk.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Surface Mountshould be used for mounting the chip.This type of FPGA is a part of the GAL?16V8 series.It is programmed with 20 pins.The GAL16V8indicates that related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].Surface Mountis the mounting point of this electronic part.A total of 20pins are provided on this board.A voltage of 5.25V is the maximum supply voltage for this device.A minimum supply voltage of 4.75V is required for it to operate.The system runs on a power supply of 5V watts.There can be 41.6MHz frequency achieved.Input signals are detected by 8dedicated inputs.This device is configured with a 8 output.There are 64 product terms associated with it.Inputs for the device are [0].The maximum current available for its operation is 55mA.
GAL16V8D-25QJN Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-25QJN Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-25QJN CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Page register
- Programmable polarity
- Battery operated portable devices
- PULSE WIDTH MODULATION (PWM)
- ON-CHIP OSCILLATOR CIRCUIT
- Software-driven hardware configuration
- Multiple DIP Switch Replacement
- Programmable power management
- ToR/Aggregation/Core Switch and Router
