GAL16V8D-7LJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®16V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL16V8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 115mA |
| Max Supply Current | 115mA |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL16V8D-7LJN Overview
The mobile phone network has 8 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is enclosed in a 20-LCC (J-Lead) package.As a result, it has 8 I/O ports programmed.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].As a result, it is packaged as Bulk.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The GAL?16V8series FPGA is one of these types.It has 20pins programmed.There are related parts in [0].If high efficiency is desired, the supply voltage should be kept at [0].Surface Mountis used to mount this electronic component.The device is designed with pins [0].A maximum voltage of 5.25Vis required for operation.A minimum supply voltage of 4.75V is required for it to operate.A power supply of 5Vis required to operate it.The frequency that can be achieved is 125MHz.The status of input signals is detected by 8dedicated inputs.The output configuration is set to [0].It is equipped with 64 product terms.16 inputs are employed.A maximal current of 115mAcan be supplied for its operation.
GAL16V8D-7LJN Features
20-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs
GAL16V8D-7LJN Applications
There are a lot of Lattice Semiconductor Corporation GAL16V8D-7LJN CPLDs applications.
- Interface bridging
- Address decoders
- ROM patching
- Digital designs
- TIMERS/COUNTERS
- High speed graphics processing
- Multiple DIP Switch Replacement
- Boolean function generators
- State machine control
- DDC INTERFACE
