GAL18V10B-15LP
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 115mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 7 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 96 |
| Height Seated (Max) | 4.57mm |
| Length | 26.125mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®18V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 66.7MHz |
| Base Part Number | GAL18V10 |
| Pin Count | 20 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
GAL18V10B-15LP Overview
10 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 20-DIP (0.300, 7.62mm).As you can see, this device has 10 I/O ports programmed into it.The termination of a device is set to [0].This electrical component has a terminal position of 0.The power supply voltage is 5V.This part is part of the family [0].Tubeshould be used for packaging the chip.To ensure its reliability, the operating temperature is set to [0].It is recommended that Through Holeholds the chip in place.This type of FPGA is a part of the GAL?18V10 series.20pins are programmed on the chip.This device is also capable of displaying [0].GAL18V10contains its related parts.For high efficiency, the supply voltage should be maintained at [0].This device is mounted by Through Hole.This board has 20 pins.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.A minimum supply voltage of 4.75V is required for it to operate.This device runs on 5Vvolts of electricity.There is 66.7MHz frequency that can be achieved.The input signals are detected by 7dedicated inputs.The device is configured with an output of [0].The product is equipped with 96 product terms.
GAL18V10B-15LP Features
20-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
10 outputs
GAL18V10B-15LP Applications
There are a lot of Lattice Semiconductor Corporation GAL18V10B-15LP CPLDs applications.
- Custom shift registers
- Software Configuration of Add-In Boards
- Protection relays
- ToR/Aggregation/Core Switch and Router
- Code converters
- PLC analog input modules
- Programmable power management
- Timing control
- Dedicated input registers
- TIMERS/COUNTERS
