GAL20RA10B-10LP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®20RA10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 71.4MHz |
| Base Part Number | GAL20RA10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 100mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 80 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL20RA10B-10LP Overview
There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 24-DIP (0.300, 7.62mm) package.There are 10 I/Os on the board.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of DUAL.The power source is powered by 5Vvolts.This part is in the family [0].It is recommended to package the chip by Tube.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Through Hole.The GAL?20RA10series FPGA is one of these types.There are 24pins on the chip.It is also possible to find REGISTER PRELOAD; POWER-UP RESETwhen using this device.According to the GAL20RA10, its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].Through Holeis the mounting point of this electronic part.There are 24pins on it.This device operates at a voltage of 5.25Vas its maximum supply voltage.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.The system runs on a power supply of 5V watts.This frequency is 71.4MHz.To detect input signals, there are 10 dedicated inputs.This device is configured to output [0].The product is equipped with 80terms.
GAL20RA10B-10LP Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL20RA10B-10LP Applications
There are a lot of Lattice Semiconductor Corporation GAL20RA10B-10LP CPLDs applications.
- LED Lighting systems
- Address decoding
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Synchronous or asynchronous mode
- Multiple DIP Switch Replacement
- Field programmable gate
- State machine control
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable power management
- INTERRUPT SYSTEM
