GAL20RA10B-15LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®20RA10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Base Part Number | GAL20RA10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 100mA |
| Propagation Delay | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 80 |
| Height Seated (Max) | 4.57mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL20RA10B-15LJ Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.The product is contained in a 28-LCC (J-Lead) package.This device has 10 I/O ports programmed into it.It is programmed that device terminations will be 28 .This electrical part has a terminal position of QUADand is connected to the ground.There is 5V voltage supply for this device.It belongs to the family [0].It is recommended that the chip be packaged by Tube.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the GAL?20RA10 series.There are 28 pins on the chip.Additionally, this device is capable of displaying [0].The GAL20RA10indicates that its related parts can be found.A Surface Mountis mounted on this electronic component.A total of 28pins are provided on this board.This device operates at a voltage of 5.25Vas its maximum supply voltage.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There is 5V power supply available for it.This frequency can be achieved at 50MHz.Input signals are detected using 10dedicated inputs.The output is configured with the value [0].It has been associated with 80product terms.
GAL20RA10B-15LJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL20RA10B-15LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL20RA10B-15LJ CPLDs applications.
- DDC INTERFACE
- Address decoders
- Multiple DIP Switch Replacement
- Power Meter SMPS
- High speed graphics processing
- ON-CHIP OSCILLATOR CIRCUIT
- Cross-Matrix Switch
- Power up sequencing
- Storage Cards and Storage Racks
- Reset swapping
