GAL20RA10B-20LPI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®20RA10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 41.7MHz |
| Base Part Number | GAL20RA10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 120mA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 80 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL20RA10B-20LPI Overview
A mobile phone network consists of 10macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 24-DIP (0.300, 7.62mm) package.There are 10 I/Os programmed in it.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 5V.It is a part of family [0].It is recommended that the chip be packaged by Tube.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.The chip should be mounted by Through Hole.In this case, it is a type of FPGA belonging to the GAL?20RA10 series.24pins are programmed on the chip.If this device is used, you will also be able to find [0].The GAL20RA10indicates that related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].The electronic component is mounted by Through Hole.The device has a pinout of [0].A maximum supply voltage of 5.5Vis used in its operation.The minimal supply voltage is 4.5V.It operates from 5V power supplies.The frequency that can be achieved is 41.7MHz.The status of input signals is detected by 10dedicated inputs.The output configuration is set to [0].In addition, it contains 80 product terms.
GAL20RA10B-20LPI Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL20RA10B-20LPI Applications
There are a lot of Lattice Semiconductor Corporation GAL20RA10B-20LPI CPLDs applications.
- Timing control
- Power automation
- Code converters
- Voltage level translation
- I2C BUS INTERFACE
- Address decoding
- Bootloaders for FPGAs
- Synchronous or asynchronous mode
- PLC analog input modules
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
