GAL20V8B-15LJN
| Parameters | |
|---|---|
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
GAL20V8B-15LJN Overview
8macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 28-LCC (J-Lead) package contains the item.It is equipped with 8I/O ports.It is programmed that device terminations will be 28 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 5Vprovides power to the device.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.During operation, the operating temperature is kept at 0°C~75°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the GAL?20V8 series.Chips are programmed with 28 pins.This device is also capable of displaying [0].The GAL20V8shows its related parts.Optimal efficiency requires a supply voltage of [0].Surface Mountis used to mount this electronic component.There are 28pins on it.It operates at a maximum supply voltage of 5.25V volts.In order for it to operate, a supply voltage of 4.75Vis required.In order for the device to operate, it requires 5V power supplies.A frequency of 62.5MHzcan be achieved.The input signals are detected by 12dedicated inputs.A 8output is configured for this device.There are 64 product terms associated with it.This device uses 20 inputs.The maximum current available for its operation is 90mA.
GAL20V8B-15LJN Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8B-15LJN Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8B-15LJN CPLDs applications.
- Custom state machines
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
- Wide Vin Industrial low power SMPS
- Digital designs
- POWER-SAVING MODES
- Multiple Clock Source Selection
- Storage Cards and Storage Racks
- Software-Driven Hardware Configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
