GAL20V8B-15LJNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL20V8B-15LJNI Overview
This network has 8macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).28-LCC (J-Lead)is the package in which it resides.It is programmed with 8 I/Os.28terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 5Vprovides power to the device.This part is in the family [0].Tubeshould be used for packaging the chip.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.As part of the GAL?20V8series, it is a type of FPGA.With 28pins programmed, the chip is ready to use.This device is also capable of displaying [0].GAL20V8contains its related parts.The supply voltage should be maintained at 5V for high efficiency.This electronic part is mounted in the way of Surface Mount.A total of 28pins are provided on this board.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.A minimum supply voltage of 4.5V is required for it to operate.A power supply of 5Vvolts is required to operate this device.This can be achieved at a frequency of 62.5MHz.The input signals are detected by 12dedicated inputs.It is configured to produce 8outputs.The product is equipped with 64 product terms.
GAL20V8B-15LJNI Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8B-15LJNI Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8B-15LJNI CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Synchronous or asynchronous mode
- Digital designs
- D/T registers and latches
- Bootloaders for FPGAs
- Code converters
- Protection relays
- PLC analog input modules
- Digital systems
- STANDARD SERIAL INTERFACE UART
