GAL20V8B-15QJ
| Parameters | |
|---|---|
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
GAL20V8B-15QJ Overview
This network has 8macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).28-LCC (J-Lead)is the package in which it resides.The device is programmed with 8 I/Os.There are 28 terminations programmed into the device.QUADis the terminal position of this electrical part.The power source is powered by 5Vvolts.It is a part of family [0].It is packaged in the way of Tube.Ensure its reliability by operating at [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the GAL?20V8 series.It is equipped with 28 pin count.It is also possible to find REGISTER PRELOAD; POWER-UP RESETwhen using this device.The GAL20V8shows its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].It operates with the maximal supply voltage of 5.25V.Despite its minimal supply voltage of [0], it is capable of operating.It runs on a voltage of 5Vvolts.This can be achieved at a frequency of 62.5MHz.The input signals are detected by 12dedicated inputs.A 8output is configured for this device.This product has a total of 64 terms associated with it.
GAL20V8B-15QJ Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8B-15QJ Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8B-15QJ CPLDs applications.
- Handheld digital devices
- Configurable Addressing of I/O Boards
- Programmable polarity
- PLC analog input modules
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
- Portable digital devices
- Software-Driven Hardware Configuration
- Address decoding
- Reset swapping
