GAL20V8B-15QJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL20V8B-15QJN Overview
8 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a 28-LCC (J-Lead) package containing it.In this case, there are 8 I/Os programmed.There is a 28terminations set on devices.QUADis the terminal position of this electrical part.The power source is powered by 5Vvolts.The part belongs to Programmable Logic Devices family.As a result, it is packaged as Tube.Ensure its reliability by operating at [0].Chips should be mounted by Surface Mount.The GAL?20V8series FPGA is one of these types.28pins are programmed on the chip.The device can also be used to find [0].You can find its related parts in the [0].High efficiency requires a voltage supply of [0].In this case, it is mounted by Surface Mount.28pins are included in its design.It operates at a maximum supply voltage of 5.25V volts.The minimal supply voltage is 4.75V.It runs on a voltage of 5Vvolts.In this case, 62.5MHzis the frequency that can be achieved.A total of 12dedicated inputs are available for detecting the status of input signals.There is an output of 8configured on the device.It is equipped with 64 product terms.
GAL20V8B-15QJN Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8B-15QJN Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8B-15QJN CPLDs applications.
- Complex programmable logic devices
- LED Lighting systems
- DMA control
- Digital designs
- Synchronous or asynchronous mode
- Page register
- Parity generators
- Bootloaders for FPGAs
- Programmable power management
- Programmable polarity
