GAL20V8B-25LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 41.7MHz |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL20V8B-25LJI Overview
There are 8 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.28-LCC (J-Lead)is the package in which it resides.This device has 8 I/O ports programmed into it.28terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.This part is included in Programmable Logic Devices.Tubeshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In terms of FPGAs, it belongs to the GAL?20V8 series.28pins are programmed on the chip.When using this device, REGISTER PRELOAD; POWER-UP RESETcan also be found.The GAL20V8indicates that related parts can be found.High efficiency requires a voltage supply of [0].This electronic part is mounted in the way of Surface Mount.28pins are included in its design.This device operates at a voltage of 5.5Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 4.5VV.It runs on a voltage of 5Vvolts.The frequency that can be achieved is 41.7MHz.The input signals are detected by 12dedicated inputs.It is configured with an output of 8.A total of 64product terms are available on it.
GAL20V8B-25LJI Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8B-25LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8B-25LJI CPLDs applications.
- Storage Cards and Storage Racks
- ON-CHIP OSCILLATOR CIRCUIT
- Cross-Matrix Switch
- Random logic replacement
- I2C BUS INTERFACE
- DMA control
- Handheld digital devices
- Address decoding
- Timing control
- State machine control
