banner_page

GAL20V8B-25LPI

5V 2.54mm PMIC GAL?20V8 Series GAL20V8 24 Pin 41.7MHz 5V 24-DIP (0.300, 7.62mm)


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-GAL20V8B-25LPI
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 912
  • Description: 5V 2.54mm PMIC GAL?20V8 Series GAL20V8 24 Pin 41.7MHz 5V 24-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1996
Series GAL®20V8
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Additional Feature REGISTER PRELOAD; POWER-UP RESET
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position DUAL
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 41.7MHz
Base Part Number GAL20V8
Pin Count 24
Number of Outputs 8
Operating Supply Voltage 5V
Power Supplies 5V
Programmable Type EE PLD
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of I/O 8
Nominal Supply Current 130mA
Propagation Delay 25 ns
Turn On Delay Time 25 ns
Architecture PAL-TYPE
Output Function MACROCELL
Number of Macro Cells 8
Number of Dedicated Inputs 12
Voltage Supply - Internal 4.5V~5.5V
Number of Product Terms 64
Height Seated (Max) 5.334mm
Length 31.75mm
Width 7.62mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

GAL20V8B-25LPI Overview


8 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 24-DIP (0.300, 7.62mm)package, you will find it.There are 8 I/Os programmed in it.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.This part is part of the family [0].The chip should be packaged by Tube.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Ensure that the chip is mounted by Through Hole.In this case, it is a type of FPGA belonging to the GAL?20V8 series.It is programmed with 24 pins.The device can also be used to find [0].The GAL20V8indicates that related parts can be found.For high efficiency, the supply voltage should be maintained at [0].This electronic part is mounted in the way of Through Hole.A total of 24pins are provided on this board.There is a maximum supply voltage of 5.5Vwhen the device is operating.The minimal supply voltage is 4.5V.A power supply of 5Vvolts is required to operate this device.The frequency that can be achieved is 41.7MHz.Input signals are detected using 12dedicated inputs.There is an output of 8configured on the device.It is associated with 64product terms.

GAL20V8B-25LPI Features


24-DIP (0.300, 7.62mm) package
8 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
8 outputs

GAL20V8B-25LPI Applications


There are a lot of Lattice Semiconductor Corporation GAL20V8B-25LPI CPLDs applications.

  • Complex programmable logic devices
  • Configurable Addressing of I/O Boards
  • Dedicated input registers
  • High speed graphics processing
  • Software-Driven Hardware Configuration
  • Digital systems
  • Cross-Matrix Switch
  • Address decoders
  • Pattern recognition
  • Protection relays

Write a review

Note: HTML is not translated!
    Bad           Good