GAL20V8B-25QJNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 41.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 65mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL20V8B-25QJNI Overview
There are 8 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a 28-LCC (J-Lead) package containing it.As a result, it has 8 I/O ports programmed.There is a 28terminations set on devices.QUADis the terminal position of this electrical part.It is powered by a voltage of 5V volts.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Tube.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.As part of the GAL?20V8series, it is a type of FPGA.Chips are programmed with 28 pins.When using this device, REGISTER PRELOAD; POWER-UP RESETis also available.According to the GAL20V8, its related parts can be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].The electronic component is mounted by Surface Mount.This board has 28 pins.With a maximum supply voltage of [0], it operates.The minimal supply voltage is 4.5V.It runs on 5Vvolts of power.There can be 41.7MHz frequency achieved.To detect input signals, there are 12 dedicated inputs.It is configured with 8 output.The product is equipped with 64terms.
GAL20V8B-25QJNI Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8B-25QJNI Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8B-25QJNI CPLDs applications.
- Software-driven hardware configuration
- Custom shift registers
- Multiple DIP Switch Replacement
- Page register
- POWER-SAVING MODES
- Power automation
- I/O PORTS (MCU MODULE)
- Random logic replacement
- ToR/Aggregation/Core Switch and Router
- Auxiliary Power Supply Isolated and Non-isolated
