banner_page

GAL20V8B-25QPI

5V 2.54mm PMIC GAL?20V8 Series GAL20V8 24 Pin 41.7MHz 5V 24-DIP (0.300, 7.62mm)


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-GAL20V8B-25QPI
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 638
  • Description: 5V 2.54mm PMIC GAL?20V8 Series GAL20V8 24 Pin 41.7MHz 5V 24-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1996
Series GAL®20V8
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Additional Feature REGISTER PRELOAD; POWER-UP RESET
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position DUAL
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 41.7MHz
Base Part Number GAL20V8
Pin Count 24
Number of Outputs 8
Operating Supply Voltage 5V
Power Supplies 5V
Programmable Type EE PLD
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of I/O 8
Nominal Supply Current 65mA
Propagation Delay 25 ns
Turn On Delay Time 25 ns
Architecture PAL-TYPE
Output Function MACROCELL
Number of Macro Cells 8
Number of Dedicated Inputs 12
Voltage Supply - Internal 4.5V~5.5V
Number of Product Terms 64
Height Seated (Max) 5.334mm
Length 31.75mm
Width 7.62mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

GAL20V8B-25QPI Overview


There are 8 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the 24-DIP (0.300, 7.62mm)package, you will find it.The device has 8inputs and outputs.There is a 24terminations set on devices.This electrical part is wired with a terminal position of DUAL.The power source is powered by 5Vvolts.It is included in Programmable Logic Devices.It is recommended to package the chip by Tube.To ensure reliability, the device operates at a temperature of [0].Ensure that the chip is mounted by Through Hole.In this case, it is a type of FPGA belonging to the GAL?20V8 series.There are 24pins on the chip.Additionally, this device is capable of displaying [0].In accordance with the [0], its related parts are listed.The supply voltage should be maintained at 5V for high efficiency.Through Holemounts this electronic component.24pins are included in its design.In this case, the maximum supply voltage is 5.5V.A minimum supply voltage of 4.5V is required for it to operate.It runs on a voltage of 5Vvolts.The frequency that can be achieved is 41.7MHz.Input signals are detected using 12dedicated inputs.There is an output of 8configured on the device.The product is equipped with 64 product terms.

GAL20V8B-25QPI Features


24-DIP (0.300, 7.62mm) package
8 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
8 outputs

GAL20V8B-25QPI Applications


There are a lot of Lattice Semiconductor Corporation GAL20V8B-25QPI CPLDs applications.

  • SUPERVISORY FUNCTION (LVD AND WATCHDOG)
  • Auxiliary Power Supply Isolated and Non-isolated
  • USB Bus
  • Digital multiplexers
  • Interface bridging
  • Protection relays
  • Custom shift registers
  • Multiple Clock Source Selection
  • Software Configuration of Add-In Boards
  • White goods (Washing, Cold, Aircon ,...)

Write a review

Note: HTML is not translated!
    Bad           Good