GAL20V8C-10LJI
| Parameters | |
|---|---|
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 130mA |
GAL20V8C-10LJI Overview
In the mobile phone network, there are 8macro cells, which are cells with high-power antennas and towers.The item is packaged with 28-LCC (J-Lead).There are 8 I/Os on the board.It is programmed to terminate devices at [0].This electrical component has a terminal position of 0.It is powered from a supply voltage of 5V.There is a part in the family [0].Tubeshould be used for packaging the chip.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the GAL?20V8 series.It has 28pins programmed.When using this device, REGISTER PRELOAD; POWER-UP RESETis also available.The GAL20V8can be used to identify its related parts.High efficiency requires a voltage supply of [0].This device is mounted by Surface Mount.There are 28pins on it.There is a maximum supply voltage of 5.5Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 4.5VV.The system runs on a power supply of 5V watts.This frequency is 83.3MHz.It has 12dedicated inputs for detecting input signals.A 8output is configured for this device.The product is equipped with 64terms.
GAL20V8C-10LJI Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8C-10LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8C-10LJI CPLDs applications.
- Reset swapping
- DMA control
- Field programmable gate
- Handheld digital devices
- State machine control
- I/O expansion
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Preset swapping
- ROM patching
- STANDARD SERIAL INTERFACE UART
