GAL20V8C-10LJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Voltage | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 115mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL20V8C-10LJN Overview
Currently, there are 8 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the 28-LCC (J-Lead) package.There are 8 I/Os programmed in it.There is a 28terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It belongs to the family [0].Tubeshould be used for packaging the chip.Ensure its reliability by operating at [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the GAL?20V8 series.The chip is programmed with 28 pins.This device can also display [0].The GAL20V8indicates that related parts can be found.Optimal efficiency requires a supply voltage of [0].The electronic part is mounted by Surface Mount.The 28pins are designed into the board.In this case, the maximum supply voltage is 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.In order for the device to operate, it requires 5V power supplies.This can be achieved at a frequency of 83.3MHz.Input signals are detected by 12dedicated inputs.There is an output of 8configured on the device.A total of 64product terms are available on it.
GAL20V8C-10LJN Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8C-10LJN Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8C-10LJN CPLDs applications.
- Portable digital devices
- INTERRUPT SYSTEM
- Complex programmable logic devices
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power automation
- I/O PORTS (MCU MODULE)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- I2C BUS INTERFACE
- STANDARD SERIAL INTERFACE UART
- PLC analog input modules
