GAL20V8C-10LJNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL20V8C-10LJNI Overview
There are 8 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].As a result, it has 8 I/O ports programmed.There are 28 terminations programmed into the device.Its terminal position is QUAD.It is powered from a supply voltage of 5V.There is a part included in Programmable Logic Devices.It is packaged in the way of Tube.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The GAL?20V8series FPGA is one of these types.It is equipped with 28 pin count.When using this device, REGISTER PRELOAD; POWER-UP RESETis also available.You can find its related parts in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].A Surface Mountis mounted on this electronic component.There are 28 pins embedded in the device.A maximum voltage of 5.5Vis required for operation.A minimum supply voltage of 4.5V is required for it to operate.It operates from 5V power supplies.It is possible to achieve a frequency of 83.3MHz.A total of 12dedicated inputs are available for detecting the status of input signals.This device is configured with a 8 output.The product is equipped with 64terms.
GAL20V8C-10LJNI Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8C-10LJNI Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8C-10LJNI CPLDs applications.
- Software-Driven Hardware Configuration
- Programmable power management
- ROM patching
- TIMERS/COUNTERS
- I/O expansion
- Boolean function generators
- White goods (Washing, Cold, Aircon ,...)
- Page register
- Multiple DIP Switch Replacement
- State machine design
