GAL20V8C-7LJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®20V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL20V8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 115mA |
| Max Supply Current | 115mA |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
GAL20V8C-7LJN Overview
The mobile phone network has 8 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 28-LCC (J-Lead) package.The device is programmed with 8 I/O ports.There are 28 terminations programmed into the device.Its terminal position is QUAD.The device is powered by a voltage of 5V volts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.The operating temperature of the machine is 0°C~75°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.It is a type of FPGA belonging to the GAL?20V8 series.A chip with 28pins is programmed.If this device is used, you will also be able to find [0].The GAL20V8indicates that its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].In this case, Surface Mountis used to mount the electronic component.The device has a pinout of [0].It operates with the maximal supply voltage of 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.In order for the device to operate, it requires 5V power supplies.This frequency is 100MHz.There are 12 dedicated inputs used to detect the status of input signals.The device is configured with an output of [0].A total of 64product terms are available on it.It is capable of operating with a maximum current of 115mA.
GAL20V8C-7LJN Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs
GAL20V8C-7LJN Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8C-7LJN CPLDs applications.
- Power Meter SMPS
- TIMERS/COUNTERS
- I/O PORTS (MCU MODULE)
- PULSE WIDTH MODULATION (PWM)
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Boolean function generators
- Digital systems
- Handheld digital devices
- Power up sequencing
- Configurable Addressing of I/O Boards
