GAL22LV10C-10LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®22LV10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 111MHz |
| Base Part Number | GAL22LV10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Nominal Supply Current | 75mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22LV10C-10LJ Overview
Currently, there are 10 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].It is programmed with 10 I/Os.The termination of a device is set to [0].This electrical component has a terminal position of 0.There is 3.3V voltage supply for this device.There is a part in the family [0].Bulkshould be used for packaging the chip.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The GAL?22LV10series comprises this type of FPGA.In this chip, the 28pins are programmed.When using this device, REGISTER PRELOAD; POWER-UP RESETis also available.The GAL22LV10indicates that related parts can be found.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.This electronic part is mounted in the way of Surface Mount.This board has 28 pins.There is a maximum supply voltage of 3.6Vwhen the device is operating.In order for it to operate, a supply voltage of 3Vis required.There is 111MHz frequency that can be achieved.Input signals are detected using 11dedicated inputs.This device is configured with a 10 output.There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL22LV10C-10LJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
10 outputs
GAL22LV10C-10LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22LV10C-10LJ CPLDs applications.
- Field programmable gate
- DMA control
- Software Configuration of Add-In Boards
- Protection relays
- Digital multiplexers
- Storage Cards and Storage Racks
- STANDARD SERIAL INTERFACE UART
- Random logic replacement
- Synchronous or asynchronous mode
- Programmable polarity
