GAL22LV10D-5LJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®22LV10 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL22LV10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Programmable Type | EE PLD |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL22LV10D-5LJN Overview
10 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 28-LCC (J-Lead) package.There are 10 I/Os on the board.It is programmed that device terminations will be 28 .This electrical part has a terminal position of QUADand is connected to the ground.There is 3.3V voltage supply for this device.It is included in Programmable Logic Devices.Package the chip by Tube.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.The GAL?22LV10series FPGA is one of these types.It has 28pins programmed.The GAL22LV10contains its related parts.Surface Mountis used to mount this electronic component.There are 28 pins embedded in the device.It operates with the maximal supply voltage of 3.6V.A minimum supply voltage of 3V is required for this device to operate.This frequency is 200MHz.A total of 11dedicated inputs are available for the purpose of detecting input signals.This device has 10outputs configured.The product is equipped with 132terms.
GAL22LV10D-5LJN Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
10 outputs
GAL22LV10D-5LJN Applications
There are a lot of Lattice Semiconductor Corporation GAL22LV10D-5LJN CPLDs applications.
- Bootloaders for FPGAs
- Address decoders
- USB Bus
- Power up sequencing
- Programmable power management
- TIMERS/COUNTERS
- Code converters
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Complex programmable logic devices
- Auxiliary Power Supply Isolated and Non-isolated
