GAL22V10D-10LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-10LJ Overview
10 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 28-LCC (J-Lead)package, you will find it.The device has 10inputs and outputs.It is programmed that device terminations will be 28 .This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 5V volts.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.It belongs to the GAL?22V10series of FPGAs.The chip is programmed with 28 pins.According to the GAL22V10, its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].This device is mounted by Surface Mount.This board has 28 pins.There is a maximum supply voltage of 5.25V.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vvolts is required to operate this device.It is possible to achieve a frequency of 125MHz.Input signals are detected using 11dedicated inputs.The output is configured with the value [0].There are 132 product terms associated with it.
GAL22V10D-10LJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-10LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10LJ CPLDs applications.
- Software-driven hardware configuration
- D/T registers and latches
- Custom state machines
- State machine design
- ROM patching
- Code converters
- I/O expansion
- DDC INTERFACE
- Pattern recognition
- Wide Vin Industrial low power SMPS
