GAL22V10D-10LJNI
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 160mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®22V10 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
GAL22V10D-10LJNI Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a 28-LCC (J-Lead) package containing it.The device is programmed with 10 I/Os.28terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.This part is included in Programmable Logic Devices.It is recommended to package the chip by Tube.A reliable operation is ensured by the operating temperature of [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the GAL?22V10 series.In this chip, the 28pins are programmed.The GAL22V10can be used to identify its related parts.The supply voltage should be maintained at 5V for high efficiency.Surface Mountmounts this electronic component.A total of 28pins are provided on this board.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.The device is designed to operate with a minimal supply voltage of 4.5VV.In order for the device to operate, it requires 5V power supplies.You can achieve 125MHzfrequencies.The input signals are detected by 11dedicated inputs.The output is configured with the value [0].It has been associated with 132product terms.
GAL22V10D-10LJNI Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-10LJNI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10LJNI CPLDs applications.
- Preset swapping
- Digital designs
- Software Configuration of Add-In Boards
- Voltage level translation
- Power automation
- Complex programmable logic devices
- High speed graphics processing
- POWER-SAVING MODES
- Code converters
- Custom shift registers
