GAL22V10D-10LP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-10LP Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).A 24-DIP (0.300, 7.62mm) package contains the item.There are 10 I/Os programmed in it.The device is programmed with 24 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 5Vprovides power to the device.The part belongs to Programmable Logic Devices family.Bulkshould be used to package the chip.The operating temperature of the machine is 0°C~75°C TA to ensure its reliability.Ideally, the chip should be mounted by Through Hole.In this case, it is a type of FPGA belonging to the GAL?22V10 series.In this chip, the 24pins are programmed.GAL22V10contains its related parts.The supply voltage should be maintained at 5V for high efficiency.This device is mounted by Through Hole.There are 24 pins on the device.A voltage of 5.25V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.It runs on a voltage of 5Vvolts.It is possible to achieve a frequency of 125MHz.Input signals are detected by 11dedicated inputs.It is configured with 10 output.It has been associated with 132product terms.
GAL22V10D-10LP Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-10LP Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10LP CPLDs applications.
- Wide Vin Industrial low power SMPS
- Reset swapping
- Boolean function generators
- Custom state machines
- Configurable Addressing of I/O Boards
- Multiple Clock Source Selection
- I/O PORTS (MCU MODULE)
- DMA control
- Storage Cards and Storage Racks
- Synchronous or asynchronous mode
