GAL22V10D-10LPI
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 160mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
GAL22V10D-10LPI Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].It is programmed with 10 I/Os.There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of DUAL.An electrical supply voltage of 5V is used to power it.The part is included in Programmable Logic Devices.The chip should be packaged by Bulk.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Chips should be mounted by Through Hole.The GAL?22V10series comprises this type of FPGA.24pins are programmed on the chip.There are related parts in [0].The electronic part is mounted by Through Hole.The pins are [0].A maximum voltage of 5.5Vis required for operation.A minimum supply voltage of 4.5V is required for this device to operate.Currently, it is powered by 5Vsources.In this case, 125MHzis the frequency that can be achieved.To detect input signals, there are 11 dedicated inputs.A 10output is configured for this device.The product has 132 product terms.
GAL22V10D-10LPI Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-10LPI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10LPI CPLDs applications.
- Software-driven hardware configuration
- Discrete logic functions
- I2C BUS INTERFACE
- Software Configuration of Add-In Boards
- Interface bridging
- Portable digital devices
- State machine design
- POWER-SAVING MODES
- TIMERS/COUNTERS
- Digital designs
