GAL22V10D-10QJ
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
GAL22V10D-10QJ Overview
There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 28-LCC (J-Lead) package.It is programmed with 10 I/Os.The device is programmed with 28 terminations.There is a QUADterminal position on the electrical part in question.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.The chip should be packaged by Bulk.The operating temperature of the machine is 0°C~75°C TA to ensure its reliability.Mount the chip by Surface Mount.FPGAs belonging to the GAL?22V10series contain this type of chip.A chip with 28pins is programmed.The GAL22V10shows its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, it is mounted by Surface Mount.There are 28 pins embedded in the device.A maximum supply voltage of 5.25Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.Currently, it is powered by 5Vsources.This frequency is 125MHz.The input signals are detected by 11dedicated inputs.The device is configured with an output of [0].There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL22V10D-10QJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-10QJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10QJ CPLDs applications.
- Interface bridging
- Storage Cards and Storage Racks
- Boolean function generators
- D/T registers and latches
- Reset swapping
- DDC INTERFACE
- Software-driven hardware configuration
- I2C BUS INTERFACE
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
