GAL22V10D-15LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 90mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-15LJ Overview
There are 10 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 28-LCC (J-Lead) package containing it.It is programmed with 10 I/Os.The termination of a device is set to [0].This electrical component has a terminal position of 0.The device is powered by a voltage of 5V volts.It is a part of family [0].It is recommended to package the chip by Bulk.During operation, the operating temperature is kept at 0°C~75°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the GAL?22V10 series.In this chip, the 28pins are programmed.The GAL22V10contains its related parts.High efficiency requires a voltage supply of [0].Surface Mountmounts this electronic component.There are 28 pins embedded in the device.There is a maximum supply voltage of 5.25Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 4.75VV.It operates from 5V power supplies.A frequency of 83.3MHzcan be achieved.To detect the status of input signals, there are 11dedicated inputs.It is configured with an output of 10.There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL22V10D-15LJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-15LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-15LJ CPLDs applications.
- Software-driven hardware configuration
- Programmable power management
- Cross-Matrix Switch
- Digital designs
- Programmable polarity
- STANDARD SERIAL INTERFACE UART
- POWER-SAVING MODES
- LED Lighting systems
- Power Meter SMPS
- Preset swapping
