GAL22V10D-15LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-15LJI Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 28-LCC (J-Lead) package.As you can see, this device has 10 I/O ports programmed into it.There are 28 terminations programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 5V is used as the power supply for this device.This part is in the family [0].Package the chip by Bulk.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of GAL?22V10series FPGA.Chips are programmed with 28 pins.The GAL22V10indicates that related parts can be found.The supply voltage should be maintained at 5V for high efficiency.The electronic component is mounted by Surface Mount.This board has 28 pins.With a maximum supply voltage of [0], it operates.It operates with the minimal supply voltage of 4.5V.It runs on 5Vvolts of power.This can be achieved at a frequency of 83.3MHz.To detect input signals, there are 11 dedicated inputs.The output is configured with the value [0].A total of 132product terms are available on it.
GAL22V10D-15LJI Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-15LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-15LJI CPLDs applications.
- Custom shift registers
- Portable digital devices
- TIMERS/COUNTERS
- I/O PORTS (MCU MODULE)
- Code converters
- Programmable polarity
- DDC INTERFACE
- Power automation
- Parity generators
- Page register
