GAL22V10D-15LJNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-15LJNI Overview
Currently, there are 10 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the 28-LCC (J-Lead) package.There are 10 I/Os on the board.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.Tubeis the packaging method.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.It belongs to the GAL?22V10series of FPGAs.There are 28pins on the chip.The GAL22V10shows its related parts.The supply voltage should be maintained at 5V for high efficiency.In this case, it is mounted by Surface Mount.The 28pins are designed into the board.A maximum supply voltage of 5.5Vis used in its operation.It is powered by 4.5Vas its minimum supply voltage.It operates from 5V power supplies.There is 83.3MHz frequency that can be achieved.It has 11dedicated inputs for detecting input signals.It is configured with an output of 10.The product has 132 product terms.
GAL22V10D-15LJNI Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-15LJNI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-15LJNI CPLDs applications.
- Protection relays
- Page register
- Multiple DIP Switch Replacement
- Power up sequencing
- Digital systems
- Configurable Addressing of I/O Boards
- Software Configuration of Add-In Boards
- D/T registers and latches
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-Driven Hardware Configuration
